Last Update: 10 Jan 2021
How to Paint a Room With a Sprayer?
Which painting technique is faster and easier? Using a paint sprayer or a pressure roller kit?
The answer is of course paint sprayer. Yet, this is true when you conclude the other extensive preparation work and when you are painting a large room or outdoor surfaces.
Using a roller may give you a quality coat, but for a smoother finish and to eliminate the task of climbing up and down a ladder to cut-in corners, you must use a paint sprayer.
Most importantly, you will get a thinner and consistent covering of paint compared to using a brush or roller.
In this article, we will show you some safety measures, required equipment, and a complete guide on how to paint a room with a sprayer.
When to Use Paint Sprayer?
You may need to use a paint sprayer to paint if any of these conditions are met,
Painting Large Surfaces.
Painting large surfaces with a paint sprayer allow you to cover wide areas with less effort than other methods.
So, if you are painting large area surfaces then using a paint sprayer is the best choice for you.
Painting a Rough or Complicated Texture.
Examples of complicated textures are crown molding, popcorn or cottage, built-up baseboards, cheese ceilings, cornices, deep exterior textures, dentils, or masonry.
It is very tough to paint these textures with a paintbrush or roller. Brushing or rolling these surfaces can cause pooled up paint, and drips.
On the other hand, a paint sprayer allows you to lay down a thin coat into the narrowest crevices.
Exterior with mature landscaping, extensive decking, sunrooms, playsets, garages can easily be painted with a paint sprayer.
When painting a small room with a paint sprayer, you may run into issues like misting or over spraying.
Issues like misting or over spraying become less when you paint an exterior wall with it.
Safety Notice to keep in Mind.
Required Tools, Equipment, and Safety Kit.
|Tools & Equipments||Safety Kit|
Priming the Surface First if Needed.
Priming will help you to freshen things up and provides you with a blank slate for painting.
Additionally, to prevent the paint from peeling off the wall when the tape is removed, make sure you use a utility knife to remove the tape.
Most importantly, if you don’t prime, then try to remove the painter’s tape as soon as possible.
Complete Instructions on How to Paint a Room With a Sprayer.
Start Spraying Your Room.
And here we’ve completed our main task on how to paint a room with a sprayer. Now it’s time for our last step: put all the things we moved back to their place.
Clean All the Things Up.
Cleaning Your Paint Sprayer After Use.
Painting a large area with a paint sprayer may take some really great time to finish for the beginner. And without knowing the proper guidance, this task may seem difficult at first.
But if you follow the above instructions on how to paint a room with a sprayer thoroughly, then it will make your project uncomplicated. You will surely get professional-like results.
However, if you are going to paint a small room, then our recommendation is to try not to use a paint sprayer. Using a paint sprayer for a small room will only make it tough. For that reason, use a pressure roller kit instead for better results and time savings.
Last one thing about your paint sprayer, make sure you clean it properly after every use. Otherwise, you will face some difficulties using it next time.