Last Update: 10 Jan 2021
Finish Nailer Vs Brad Nailer
The finish and the brad nailer are 2 similar devices that have the same objective. The main target is to nail the floor, ground, wood, roof, etc. But applied force is a big issue for which the general difference between them is occurring. So we are going to compare between finish nailer vs brad nailer.
The main difference is the size of the gauge which is the nail holder of the gun. Generally, a finishing nailer has a gauge size of 16 inches. On the other hand, the brad nailer consists of 18 inches of the gauge. Also, the hole diameter for each nailer is different and their application depends based on the requirements.
What Is A Finish Nailer?
The finishing nailer is kind of a stapler that is used to insert nails into the target objects. Some components are seen in almost every device. Sometimes extra pressure is brought through using an air compressor. Here are some basic components so far,
This is a metallic portion of the nailer gun which is situated at the front of the action area. This section is used to press down the whole device to insert the nail.
This is used to store the nails to inject into the objects. The mentioned size indicates the measurement of the nail which will be inserted. The measurement is around 15 to 16 inches.
This hub is mainly for increasing pressure power. Sometimes the target object may consist of high rigidity factors. So an air compressor is connected through that hub to increase power.
The body material impacts on the whole weight of the product. So the material used to manufacture the finish nailer needs to be light and rigid. Mostly, the alloy is used to manufacture it.
How To Use A Finish Nailer?
It doesn’t require skills to use a finish nailer. But some safety factor is needed while doing the nailing job. Because this kind of huge pressure can cause damage to your body. Here are some safe working principles.
What Is A Brad Nailer
A Brad nailer is a comparatively smaller device than the finish nailer. But the application is the same as the finish nailer. Some basic similarity is seen related to the finish nailer. Here are some basic components.
Outer Surface Material:
The weight will become a big issue while working at a height from the ground. So to make the body light, high-hardness anti-tensile strength material is used.
Sometimes it is required to punch the nail into the high diameter object. But the pressure from the brad nailer might not seem to be enough. So increasing the pressure will only be possible in this section.
The gauge is the main part where all the nails are situated and being loaded for firing. The gauge has a high density of nails and the size of the nail is comparatively smaller than the finish nailer.
Push Down Valve
This valve is needed to initiate the pressure on the target surface. You just need to push down this section to insert the nails into the target object.
How To Use A Brad Nailer
The using method is quite similar to the finish nailer. The gauge is the main difference between the 2 nailers. The working principle is dependent on the situation for using the nailer. Here are the using method.
Difference Between Finish Nailer Vs Brad Nailer
Here is the section where you will learn about the finish nailer vs brad nailer comparison. The difference is not very significant. Both of the devices are used in different applications also.
Gauge Of Nails
This is the main significant difference between the 2 nailers. There is 1 type of measurement. A finish nailer has a gauge value of 15 to 16 inches. The needed force to insert these nails are comparatively higher.
On the other hand, Brad nailer consists of 18 inches of gauge value. This means the density of the nails is slightly increased. As the gauge plate has a similar size, the size of the nails is also decreased.
After a forceful punch, there will be a hole of precise diameter. Both of the machines show different values of diameter. A Brad nailer left a hole mark on the target object around 0.0450 to 0.050 inches.
A finish nailer has a wide range of hole marks, as the hole diameter is comparatively higher. But that doesn’t mean it cannot be used for small-diameter nails. The range of the mark is around 0.040 to 0.07 inches.
Power Holding Capacity
Both of the devices have different power holding capacity. Brad nailers have less capacity for holding power. On the other hand, the finish nailer is used for heavy-duty and capable of tolerating high payload.
A finish nailer is generally used for heavy work. As the hole diameter is greater, the tension strength is also higher. The device is used for finishing the furniture, jointing any wooden piece, roofing, etc.
Brad Nailer is mainly used for soft stapling. The high pressure is not needed to nail the target object. It is used to thin-trim the floor with cardboard, light carpet installation on the floor or the roof, etc.
The nailing job is all about the pressure and the compression level on the target object. As there are 2 types of nailers, the application is also different. But the area of the differential state is small. So we have made the finish nailer vs brad nailer content for your better understanding of the little differences between them. Hope you have found all the answers you needed.