Champion Log Splitters Reviews

Champion power equipment produces the best products that have the target to get customer’s satisfaction. For this reason, they have made daily life even easier by creating the log splitter machine that reduces human effort. The product comes with various features that are not known very well by everyone. So here are some features with examples to help you understand,

27 Tons Total Force

The main objective of this type of machine is splitting the ram with great force to minimize human fatigue. Sometimes the log that you are supposed to split consists of a huge weight and is very hard in structure.

So it becomes more difficult for a fellow to cut it by himself. The produced force by the machine is up to 27 tons which is enough for any kind of log you can carry.

Horizontal & Vertical Operation

These 2 features are quite handy depending on what circumstance you are being faced. It is a matter of working and place demand. You can do your log splitting at 2 positions that are allowed by the product. Horizontally and vertically are the only scope for splitting operations. You just need to attach the objective log to the log catcher perfectly. Log catcher can be adjusted depending on the log size.

11 Seconds Duration Of Cycle

While we are talking about machines, it must be the one that reduces the total operational time. The fast operation is one of the beneficial qualities that can save our valuable time and increase the total efficiency. But the duration of the log splitting operation is divided by 2 stages.

The first stage starts with moving the shaft downward towards the target and the second stage starts when it goes upward. The total time that has been spent here is 11 seconds.

24 Inch Length Capacity

The log that you want to insert into the log catcher has a specific amount of optimal range. Although the rage that has been given is not always needed actually.

Because the rage is given 24 inches and it is more than enough for a regular log to be inserted. Also, the 24-inch log can be very heavy and very much hard to carry without extra manpower.

100 Pounds Weight Capacity

The weight capacity is a very important factor, as the diameter of the log varies a lot. If the diameter gets bigger than expected, it becomes too hard to carry and even harder to place the log to the catcher.

So to save the machine from going down and to reduce extra load, a minimal amount of weight capacity has been adjusted. A maximum of 100 pounds of log weight can be inserted.

Single Pattern Wedge

The wedge has a working capability with a single piece of log. That means you cannot split more than one log at a time. This feature was added for a very good reason. The machine was not manufactured for working with 1 log and all the other features are one-log oriented to avoid any kind of accident.

Obdurate Steel Skewer Material

We all know that steel has a very high capacity for tolerating tensile stress. Also, the compression force is highly reduced by the material. The wedge material is made of steel. But the steel is also obdurate or hardened. For this, the compressive-load reducing capacity increases more than before.

2 States Hydraulic Engine

Single state hydraulic engines often face some problems. One of the most important resistance is liquid jamming. For the jamming of liquid, the hydraulic pipeline goes under huge pressure. After a certain time, the pipe loses its strength and breaks down. To prevent this, 2 states are attached to the machine.

Auto Return Feature

This feature reduces more time, as the returning operation doesn’t need to be done manually. There is a function of starting the downward operation only and also a button for upward operation. If you want to do the process simultaneously, you just need to press an additional push button that allows you to do both operations.